API 650 unanchored flat-bottom tank data sheet

Every customer who has visit us and witness the steel materials before delievry will be impressed by our quality control departemnt. Even not come to inspect the steel materials before delievry, our quality control departemnt will also send inspection report to the customer. For each order, no matter its quantity and value, our quality control departemnt will make strict inspection before delivery, the inspection contents include apperance, tolerance, dimension, mark, special requirements of customers, etc. To guarantee our steel materials sent to the customer is qualified.Shell Stiffening Rings for Tanks That Contain Liquid: Internal or external shell stiffening rings may be required to maintain roundness when the API 650 unanchored flat-bottom tank is subjected to wind, vacuum, or other specified loads. When stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure R-1 and R.3.5.2 through API Standard 620 R.3.5.5. Three-plate laps or butt-weld junctions in the tank bottom shall be not closer than 12 in. from each other and/or the butt-welds of the annular plate.API 650 is an American standard for welding flat bottom vertical storage tanks. This API 650 unanchored flat-bottom tank standard specifies requirements for the design, manufacturing, welding, inspection and installation of storage tanks. API 650 is widely used in storage tanks designed to withstand low internal pressures and used to store typical products such as API 650 unanchored flat-bottom tank crude oil, gasoline, chemicals and water. BBN has extensive experience in API 650 tanks, from +/- 500 cubic meters of tanks produced in the factory to +/- 15000 cubic meters of tanks produced on site.Integrity based:To customers, we should value our credit and keep our good image forever.To colleagues: respect each other, trust each other, make efforts togetherService first:Customer satisfaction is always the first pursuit.The company provides customers with not only advanced technology and high-quality API 650 unanchored flat-bottom tank products, but also the spirit of credit and service.Innovation:We are good at learning, drawing on the strengths of all, innovating and developing, introducing, researching and developing the latest technology, and making our products have a stronger vitality.There is no dome roof in the top of the vertical external floating roof oil storage tank, only the disc floating roof which can float up and down. The wall plates are connected by butt welding, and the construction is usually carried out by the forward installation method, and the storage capacity is usually more than 10000 cubic meters. Vertical internal floating roof API 650 unanchored flat-bottom tank has both dome roof and internal floating roof. The internal floating roof floats on the liquid surface inside the dome roof oil tank and can float up and down. The storage capacity is usually between 1000 and 10000 cubic meters.