API 650 larger diameter tanks foundations for elevated temperature service
The process parameters should be strictly controlled in sand blasting of API 650 larger diameter tanks. The working pressure of abrasive chamber is between 0.5 and 0.6a, and the outlet pressure of air compressor shall not be lower than 0.6 WPa. According to the test results, the distance between nozzle and workpiece shall be controlled at 80 - 200 mm and spraying angle of 30 ~ 75°is appropriate.All welded seams in the API 650 larger diameter tanks bottom, and complete penetration and complete fusion sidewall-to-bottom welds, shall be inspected by means of a vacuum box test as described in Q.8.2.1. Sidewall-to-bottom welds not having complete penetration and complete fusion shall be inspected by means of either a vacuum box test of the inside weld as described in API 620 specification Q.8.2.1, or where approved by the Purchaser, a direct pressure solution film test as described in Q.8.2.2.Under the same sealing effect, the internal floating roof tank of API 650 oil storage tank can further reduce the evaporation loss compared with the API 650 larger diameter tanks External floating roof tank. This is due to the shielding of the fixed roof and the gas layer between the fixed roof and the internal floating plate, which has more significant heat insulation effect than the double disc floating roof of the API 650 larger diameter tanks external floating roof tank.Enterprise style: unity, pragmatism, responsibility, and endeavorOperation Policy: realistic management, innovative technology, high quality, fast efficiency, low cost and complete service. Enterprise spirit: every year, every day, we should make progressEnterprise development is a process of continuous pursuit of progress. This spirit is reflected in the whole three-dimensional space of every person, every event and every time point in our enterprise. We should always continue to explore, break through and improve.S355J2 hot rolled steel plate executive standard: EN10025-2S355J2 hot rolled steel plate delivery status: control binding, normalizing rolling, normalizingThe European standard S355J2 hot rolled steel plate is available from API 650 larger diameter tanks stock and can be cut and processed according to the requirements of customers; the futures can be produced according to your requirements, and our S355J2 hot rolled steel plate price is preferential and the delivery time is fast, welcome to contact and purchase.
Latest NewsMore+