API 650 flat-bottom steel tanks decks
Butt-welded joints used to fabricate large steel storage tank fittings shall be completely radiographed. Lines carrying liquid shall be hydrostatically or pneumatically pressurized at a minimum pressure of 35 lbf/in.2 and API 650 flat-bottom steel tanks butt welded joints shall be simultaneously visually examined (hydrostatic) or solution film tested (pneumatic) for tightness. If manufactured pipe has been hydrostatically tested previously to ASTM requirements, then only circumferential welds need to be examined.
API 650 is used to store products such as crude oil, gasoline, chemicals, and produced water. BBN has extensive experience in API 650 flat-bottom steel tanks API 650 tanks with diameters between 8'-300', which are suitable for refineries, terminals, pipeline facilities and other projects.
The Seamless Pipe Q345D to Thailand. In November of 2015, Thailand OTTO group contacted with us from Internet. They are finding the trustable supplier of S355/2H seamless pipe for the cable car supporter. Due to the special using of the pipes, they are very careful and serious when choosing the supplier. After one months contact and discussion by email, they come to our company. We drive to the pipe mill for visit of 2 days. Through this visit, they are very confident with our production ability and products quality. Finally, they accept the grade we suggest Q345D. After back to office, they put the order of 1800 tons pipe to us directly.
}Proper use of API 650 flat-bottom steel tanks and precautions:1. The API 650 flat-bottom steel tanks must be used within the safe height range;2. Check before use to ensure that the safety valve and breathing valve are flexible and easy to use;3. The explosion-proof and fire-proof safety measures for oil tanks are implemented effectively;4. The oil level in the API 650 flat-bottom steel tanks should be accurately measured when receiving and delivering oil, so as to prevent overflow or empty;5. In the process of receiving and sending oil, the flow rate of oil should be controlled, and it should not be too fast to avoid electrostatic accidents.
The after-sales service department will pay return visit to each customer by call or email, report problems found during the return visit in time, and discuss with the production and quality inspection center to propose effective solutions and follow up in a timely manner, so as to ensure the benefits each customer are fully guaranteed, and to provide customers with more value-added services.
