API 650 flat-bottom oil storage tanks subject to a small internal pressure
The process parameters should be strictly controlled in sand blasting of API 650 flat-bottom oil storage tanks. The working pressure of abrasive chamber is between 0.5 and 0.6a, and the outlet pressure of air compressor shall not be lower than 0.6 WPa. According to the test results, the distance between nozzle and workpiece shall be controlled at 80 - 200 mm and spraying angle of 30 ~ 75°is appropriate.
refrigerated tanks secondary components are those whose failure would not result in leakage of the liquid being stored. Secondary components also include those API 650 flat-bottom oil storage tanks components that are not in contact with the refrigerated liquid but are subject to the refrigerated temperature vapors and have a combined tensile and primary bending stress under design conditions that does not exceed 6000 lbf/in.2. Secondary components that could be designed within this reduced stress are roof plates, including roof manways and nozzles with their reinforcement, roof-supporting structural members, and shell stiffeners.
This specification, in conjunction with API 650 Standard, prescribes minimum standards for the API 650 flat-bottom oil storage tanks design, supply fabrication, erection, and testing of field erected welded steel storage tanks complete with accessories as specified herein and as shown on attached datasheets and/or drawings.
The company's quality is first, the price is reasonable, the construction period is guaranteed, and the purpose of abiding by the contract, our steel API 650 flat-bottom oil storage tanks products have received high recognition from customers from the world. The company adheres to the operating principles of equality and mutual benefit and abides by the contract. We sincerely welcome you to visit us, negotiate business cooperation, enhance friendship, develop and expand trade.
S355J2 hot rolled steel plate executive standard: EN10025-2S355J2 hot rolled steel plate delivery status: control binding, normalizing rolling, normalizingThe European standard S355J2 hot rolled steel plate is available from API 650 flat-bottom oil storage tanks stock and can be cut and processed according to the requirements of customers; the futures can be produced according to your requirements, and our S355J2 hot rolled steel plate price is preferential and the delivery time is fast, welcome to contact and purchase.