API 650 anchored tanks roof venting

Manufacturer’s Report and CertificateUpon completion of all tests and inspections on each tank API 650 anchored tanks, the Manufacturer shall prepare a report summarizing all the data on the tank, including foundations (if they are within the Manufacturer’s scope of responsibility) and shall attach to the report all drawings and charts as required by other paragraphs in this section of the rules (see API 620 tank 7.13 and Appendix M).The tank Manufacturer shall furnish and fill out a certificate for each tank (such as that shown in Appendix M), attesting that the tank has been constructed according to the rules in this standard. This certificate shall be signed by the Manufacturer and the Purchaser’s inspector. This certificate, together with the nameplate or markings placed on the tank, shall guarantee that the Manufacturer has complied with all applicable requirements of these rules.

For areas with high groundwater levels, the operator should take anchoring and anti-floating measures for buried horizontal API 650 anchored tanks oil tanks; API 650 oil tanks can be used for heavy fuel oil, heaters are separately designed, and buried tank material outlets are installed with bottom valves and connections. consider.

ANDRITZ GROUP is the world's leading industrial group, with 29500 employees and more than 280 branches in more than 40 countries. We have cooperated with their Mexico company for many years about S355J2+N steel plates and cutting sectors. The S355J2+N steel plates API 650 anchored tanks need to cut according to the drawing by standard tolerance, UT, MT and dimension request. The final application of the S355J2+N steel plates and cutting sectors are for assembling hydraulic machine.

Prefabrication requirements of API 650 anchored tanks, large vertical storage tank wall panels:
1. The prefabrication of wall panel shall be processed in strict accordance with the requirements of the drawings, and inspection records shall be made.
2. After the wall panel is rolled, it should be placed on the platform for inspection with a template. In the vertical direction, use a straight-line template to check, the gap should not be greater than 2 mm, and in the horizontal direction, use an arc-shaped template to check, and the interval should not be greater than 4 mm.
3. When wall panels are rounded, attention should be paid to prevent irreversible plastic deformation caused by external forces. After rolling, it should be placed on the platform for inspection, and then placed on the prepared mold.

Both parties shall confirm the API 650 anchored tanks material object and the quality of the products, confirm the reasons for the defects and the quality of the products, and sign the quality inspection agreement. Major quality objections shall be reported to relevant leaders in a timely manner, and shall be discussed and solved with the API 650 anchored tanks steel plant.