Anchorage design for API standard 650 SUG I tanks

For floating roof API 650 tanks, the net working capacity is the liquid volume contained between the API standard 650 SUG I tanks maximum operating level (300 mm below rim for metallic type seals and 600 mm below rim for fabric type seals) and the minimum operating level (API 650 tanks roof supports clearing the tank bottom by 25 mm while set at the operating position).

Large Steel storage tank Anchorage
In addition to the loads in API 620 oil storage tank Q.4, Q.5.1, and Q.5.2, the anchorage for the tank that contains liquid, whether it be a single-wall tank or the inner tank of a double-wall tank, shall be designed to meet the requirements of Q.3.6.2 through Q.3.6.5. The anchorage shall accommodate movement of the tank wall and bottom caused by thermal changes. For anchored flat-bottom tanks, the anchorage shall be designed as described in Q.3.6.4.1 through Q.3.6.4.3.

The cone slope of the completed API standard 650 SUG I tanks foundation is 15/1000 for the general foundation and less than 35/1000 for the soft foundation. After the foundation settlement of the storage tank is basically stable, the surface slope must be greater than eight thousandths. The edge of the tank bottom should be more than 0.3 meters higher than the surrounding ground. Above the ground, the tank bottom leakage detection tube should be drawn from the foundation sand cushion and cross the foundation ring wall or the slope protection surface. The circumferential distance should be less than 20 meters, and each API standard 650 SUG I tanks should have at least 4 detection tubes.

Enterprise Motto:Integrity, harmony, dedication, innovation and developmentAbility is the cornerstone of success; action is the ladder of successGrow with the enterprise; progress with the enterpriseGive a platform to those who actually do things and a stage to those who successfully do thingsDare to be the first, to pursue excellence.

Iron and steel goods, including pig iron, ingots, all kinds of steel and so on. Therefore, logistics companies are required to load evenly and evenly in the process of transportation, prevent moisture and prevent corrosion. It is necessary to prevent the API standard 650 SUG I tanks steel sheet from being mixed with water when transporting the steel; it is necessary to prevent the API standard 650 SUG I tanks steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when loading the API standard 650 SUG I tanks steel sheet on the truck Good luck.

Our company will accept the product quality objection registration record, pass it to the API standard 650 SUG I tanks production unit and relevant departments, and timely coordinate the supervision of product API standard 650 SUG I tanks quality objection. Our company coordinates the relevant department personnel to the customer unit to carry on the investigation, the processing.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!