aluminum sheet 5154 API standard 650 welded aluminum storage tanks

The technology center has always been focusing on application research, improving market realization and scientific and technological contribution rate; taking user demand as the goal, highlighting the personalized development of products; taking the joint development of industry, University and research, and technology integration as the means, improving the starting point and level of innovation, and realizing the breakthrough of core technology; taking advanced research as the guide, pursuing the leap of technological development; taking system and mechanism innovation as the driving force, Promote and realize the working concept of technological innovation.When as-rolled plate material complies with impact test requirements as specified here, the material need not be normalized. If, as with ASTM A516, the specification prohibits impact test without normalizing but otherwise permits as-rolled plates, the API 620 welded storage tanks material may be ordered in accordance with the above provision and identified as “MOD” for this API modification.API 650 petroleum storage tank has the advantages of high safety: the API standard 650 welded aluminum storage tanksinner floating plate floats on the liquid surface, so that the liquid phase has no evaporation space, which can reduce the evaporation loss by 85% to 90%. At the same time, the API 650 petroleum storage tank blocks the air and liquid storage through the floating disk, which reduces air pollution and reduces the degree of fire risk.Customer concept: customer first. Guided by market changes and guided by customer needs, we design the optimal product solutions and provide the best after-sales service. Partners: to reach a balance of interests with all stakeholders, to build a harmonious coexistence and win-win cooperation.The cone slope of the completed API standard 650 welded aluminum storage tanks foundation is 15/1000 for the general foundation and less than 35/1000 for the soft foundation. After the foundation settlement of the storage tank is basically stable, the surface slope must be greater than eight thousandths. The edge of the tank bottom should be more than 0.3 meters higher than the surrounding ground. Above the ground, the tank bottom leakage detection tube should be drawn from the foundation sand cushion and cross the foundation ring wall or the slope protection surface. The circumferential distance should be less than 20 meters, and each API standard 650 welded aluminum storage tanks should have at least 4 detection tubes.