Aluminum dome roofs API 650 anchored liquid-storage tanks
API 650 storage tanks API 650 anchored liquid-storage tanks are only suitable for containers that can evenly support the entire bottom and containers for non-refrigerated equipment with a design maximum temperature of 200 degrees Fahrenheit. It API 650 anchored liquid-storage tanks requires a minimum thickness of 3/16 inch. Other characteristics of the API 650 storage tank are: it is composed of carbon steel, austenitic duplex stainless steel and aluminum.
For the welding of API 650 anchored liquid-storage tanks bottom, attention should be paid to the slag removal and drying of the welding joint before welding, and there is no sediment and oil contamination in the lap joint of steel plate. The manufacturing quality and production efficiency of the central plate can be obviously improved by adopting the rolling central plate. The butt joint is used between the rolling plates to improve the installation conditions of the central plate at the bottom of the API 650 anchored liquid-storage tanks. The welding sequence of the central plate is from the center of the central plate to the surrounding.
Surface Inspection of low-pressure storage tank Component PartsBefore assembly, unless already so certified by shop inspectors, all sidewall plates or sections and roof and bottom plates shall be inspected for thickness, freedom from injurious defects, and soundness of any welded joints.Check of Dimensions of API 650 anchored liquid-storage tanks Component PartsAll formed plates and curved sections shall be checked for conformance with the planned dimensions and cross section. For unusual repairs the inspector should keep a record of measurements taken at sufficient intervals to constitute a satisfactory record.Check of Chemical and Physical Property DataThe inspector shall check the material being assembled by the lists of the plates from the mill, their heat numbers, chemical analyses, and mechanical properties as given on mill reports and shall see that copies are available to be attached to the Manufacturer’s report.
We can process the steel materials according to your drawing. Or if you can not make drawing, please send us API 650 anchored liquid-storage tanks specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.
Facing the new situation and facing new goals, the company revolves around the sixteen-character development policy of “prioritizing production preservation, society-oriented, market operation, and brand creation and efficiency”. Layout the country in accordance with the modern logistics model, and accelerate the establishment of a modern integrated steel enterprise integrating steel storage, transportation, processing, and distribution.
