Alclad 6061 aluminum plate API Std 650 special tank

The process parameters should be strictly controlled in sand blasting of API Std 650 special tank. The working pressure of abrasive chamber is between 0.5 and 0.6a, and the outlet pressure of air compressor shall not be lower than 0.6 WPa. According to the test results, the distance between nozzle and workpiece shall be controlled at 80 - 200 mm and spraying angle of 30 ~ 75°is appropriate.

Steel Storage Welded Tank Certification
A certificate shall be supplied for each tank. This practice is intended to simplify keeping the records of future inspection in separate files for convenience. When a group of crude oil storage tanks is being constructed on one order and in one general location some specific form of reporting other than a API Std 650 special tank Manufacturer’s report may be preferred by both parties. It would seem desirable that the details on each contract be settled when the purchase order is placed; if they are not covered in the proposal, then they shall be given as information in the inquiry.

The calculated thickness of the above-mentioned wall panels required by the hydrostatic pressure is also It API Std 650 special tank should be increased by the same ratio, unless special analysis is performed to determine the seismic overturning moment and the corresponding stress at the bottom of the wall of each layer of API 650 tank.