A516 Gr 55 plates API standard 650 mechanically-anchored tanks

Crack treatment of API standard 650 mechanically-anchored tanks weld area: find out the crack tip with ray or ultrasonic flaw detection, drill cut-off holes at both ends of the crack with the cut-off method, the hole depth is slightly greater than the crack depth, or groove (crack stop groove) is made by angle grinder at both ends of the crack, shovel and grind the whole crack, and grind it into a suitable groove; use radiographic inspection and dye detection to verify that the crack has been completely excavated, and finally repair welding.

The density of the liquid API 620 large welded, low pressure storage tanks stored shall be its maximum density within the range of design temperatures, but no less than 36 lbf/ft3. The maximum allowable tensile stress shall be taken from Table 5-1 or Table Q-3. For the maximum allowable stresses for design loading combined with wind or earthquake loads, see API Standard 620 5.5.6 for carbon steel and Q.3.3.5 for stainless steel and aluminum.

Pipeline transportation of API 650 oil tank is not less than the maximum consumption of 3 to 5 days. The daily operating time of API standard 650 mechanically-anchored tanks office buildings and fuel oil equipment is 12-16 hours; for high-end residential hotel buildings, the daily operating time is 16-24 hours.

Keep in mind your mission and never forget your mission." At present, the BEBON steel leadership team unites the majority of cadres and employees to keep in mind their glorious missions, guided by Xi Jinping's ideology of socialism with Chinese characteristics in the new era, fully implementing the spirit of the 19th CPC National Congress, in-depth implementation of the requirements of the "three advances", pioneering spirit, and striving In order to lead high-quality development with innovation, build a new pattern of Anshan Iron and Steel's revitalization and development, strive to build the most internationally influential steel company, and make new contributions to the start of a new journey for BEBON Iron and Steel Group.

Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our API standard 650 mechanically-anchored tanks products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.