5154 aluminum bar API 650 cylindrical tanks

The thickness of the API 650 cylindrical tanks wall plate, t, required by 5.10.3 for the latitudinal unit forces, T2, acting at this level is 0.57 in. The nozzle neck is seamless steel pipe and conforms to ASTM A53, Grade A; the materials in the tank wall and reinforcing pad conform to ASTM A442 Grade 55. The main joints in the tank walls are fully radiographed, double-welded butt joints. The adequacy of the reinforcement and attachment welds shown in Figure F-7 shall be determined.
To determine the length of the nozzle neck within the limits of reinforcement, the smaller of the following calculated values shall be used:(2.5)(0.625) = 1.56 in.
(2.5)(0.375) + 0.75 = 1.69 in.

Under the action of the earthquake, API 650 storage tank is mainly damaged by the phenomenon of the lower part of the API 650 cylindrical tanks tank wall. Therefore, the key point of seismic calculation is to prevent the tank wall from buckling under axial pressure.

In October 19th 2018, our Malaysia customer purchased 600 Tons CCS Grade AH36 mairne steel API 650 cylindrical tanks plates to use in their shipbuilding project .This customer is a famous shipyard company in Malaysia. Their company has the business scope of tourism, shipbuilding, transportation and so on. As a terminal manufacturer, they have strict requirements on quality for CCS Grade AH36 mairne steel plates. After visiting our steel milll, the customer is very satisfied with the quality of this batch of CCS Grade AH36 steel plates.

The API 650 cylindrical tanks must go through strict inspection before putting into use. Inspection of plate groove of API 650 cylindrical tanks, vertical oil tank: After finishing the groove processing of oil tank plate, it is necessary to conduct dye penetrant inspection on the groove. This process is mainly aimed at the hard damage of groove in the machining process and the defects of the plate itself. If any defect is found, it shall be processed again until the defect disappears.

Adhere to the spirit of quality first and user foremost, carry out maintenance and other work according to the requirements of the buyer's contract, and ensure that the engineering project and product after-sales play their application effectiveness. Our company guarantees to carry out self inspection and self supervision according to the quality management policy proposed by our company, and deliver a high-grade, perfect and excellent system engineering to users.