1100 aluminum forgings API standard 650 closed top welded storage tanks

For areas with high groundwater levels, the operator should take anchoring and anti-floating measures for buried horizontal API standard 650 closed top welded storage tanks oil tanks; API 650 oil tanks can be used for heavy fuel oil, heaters are separately designed, and buried tank material outlets are installed with bottom valves and connections. consider.

API standard 650 closed top welded storage tanks weld tightness test: remove dirt from the API standard 650 closed top welded storage tanks weld, apply white powder emulsion, spray kerosene on the other side of the weld after drying. Because of the strong penetration of kerosene, if kerosene is sprayed after 12 hours (under low temperature conditions, the time can be extended), if the surface of the welded seam coated with white emulsion has no spots, the welded seam meets the requirements.

The cultural construction must let the enterprise staff participate in the enterprise culture, in order to better carry on the effective dissemination enterprise idea, the sharing value system, such as the internal communication, the newspaper, the forum, the propaganda, the news announcement and so on. At the same time, the system can also be used to educate and train employees, send blessings to employees on their birthdays or during Chinese New Year holidays, so that employees can feel the practice of corporate culture, the warmth of the enterprise, and enhance the sense of belonging and recognition of the enterprise.

Test plates shall be welded using the same qualified welding procedure and electrodes that are required for the tank shell plate joints. The API 620 steel storage tank test plates need not be welded as an extension of the tank shell joint but shall be welded in the required qualifying positions. One test weld shall be made on a set of plates from each specification and grade of API standard 650 closed top welded storage tanks plate material, using a thickness that would qualify for all thicknesses in the shell. Each test welded of thickness t shall qualify for plate thicknesses from 2t down to t/2, but not less than 5/8 in. For plate thicknesses less than 5/8 in., a test weld shall be made for the thinnest shell plate to be welded; this test weld will qualify plate thicknesses from t up to 2t.