1100 aluminum bar API standard 650 petroleum storage tanks

It is very important for an enterprise to have a sound after-sales service system, which not only ensures the normal outflow and inflow of the company's products, but also improves the trust of the company's products in the hearts of customers. Our company has a special after-sales service team and good after-sales service reputation. In case of any problem in the use of our steel products API standard 650 petroleum storage tanks , whether quality problem or not, the after-sales service department will assist in solving the problem as soon as possible, and regularly consult and track the use of the steel products.In this project, an area of steel storage oil tank wall is constructed of ASTM A285, Grade C, steel plate that is 5/8-in. thick and has spot-radiographed, double-welded butt joints. The wall is subject to tension in a meridional direction and to compression in a latitudinal direction. The values of R1 and R2 at the point under consideration are 75 in. and 300 in. respectively. A corrosion allowance of 1/16 in. is required. The computed (meridional) tensile stress, stc, in the net thickness after deduction of the corrosion allowance is 6000 lbf/in.2.In API 650 oil storage tank, when the mixing ratio of combustible medium and air reaches a certain limit, it is easy to cause explosion. Therefore, it is necessary to add API standard 650 petroleum storage tanks external floating roof to open cylindrical steel API standard 650 petroleum storage tanks tank. At present, the external floating roof is most suitable for large-scale API 650 oil storage tank in China, ranging from 20000, 30000, 50000 cubic meters to 100000 cubic meters.Training is one of the important factors in the construction of corporate culture. Online training system can be used to enable all employees to take advantage of fragmented time and carry out targeted training anytime and anywhere without the limitation of time and region. Through training to improve work skills, at the same time, through training, let all improve their quality education level, let employees work around a goal, create a career, and produce results.Welding inspection of bottom plate of API standard 650 petroleum storage tanks, vertical oil tank: During the fabrication and installation of API standard 650 petroleum storage tanks, the bottom edge plate is welded first. According to the requirements of the technical standard, penetrant inspection is required for the weld of edge plate at the bottom of API standard 650 petroleum storage tanks, that is, penetrant testing is required for each weld bead priming, filling and capping. In the process of testing, if any defect is found, it shall be repaired immediately. After the repair, the surface coloring penetrant test shall be conducted again until the test result is qualified.