US Customary units API standard 650 flat-bottom steel tanks

If additional requirements are met, higher internal pressures are allowed. API 650 only covers tanks that support the whole bottom evenly and API standard 650 flat-bottom steel tanks tanks in non-refrigerated service that have a maximum design temperature of 200 degrees F. It requires that you have a minimum material thickness of 3/16 inch.

Structural shapes of 9% and 5% nickel steel may be furnished to the chemical and physical requirements of ASTM A353, A553, or A645. Physical tests shall be in accordance with the requirements of ASTM A6.
API standard 650 flat-bottom steel tanks used Piping, Tubing, and Forgings
Material used for piping, tubing, and forgings shall be compatible in welding strength, and thermal expansion coefficient with the tank shell material. In addition to the specific requirements of this appendix, all piping within the limitations of 1.3.2 shall fulfill the minimum requirements of ASME B31.3.

The longer the service life of the API standard 650 flat-bottom steel tanks, the lower the reliability and the prone to failure. Doing a good job in the maintenance of the metal oil tank can ensure the normal use of the oil tank, reduce the wear of the API standard 650 flat-bottom steel tanks body and accessories, and extend the service life of the oil tank. The maintenance of metal oil tanks is mainly to do a good job in the anti-corrosion of the oil tank, the cleaning of the deposits in the API standard 650 flat-bottom steel tanks and the overhaul of its accessories. Regularly inspect and maintain the accessories of the oil tank: valves, oil measuring holes, breathing valves, flame arresters, ladders, foam fire extinguishing generators, etc., and make records. If any damage is found, repair them in time.

Aspire to technological innovation and pursue first-class quality steel API standard 650 flat-bottom steel tanks products.Take independent innovation as an important support for the sustainable development of iron and steel industry, strengthen the main position of technological innovation, accelerate the original innovation, integrated innovation, introduction, digestion, absorption and re innovation, improve the technological innovation system, and cultivate the core technology and brand products of independent intellectual property rights.

The company's logistics team adheres to the development concept of “gathering advantages, providing superior services, creating value, and leading the market”, and tightly focuses on the strategic positioning of “developing large-scale steel logistics and building large-scale steel supermarkets”. Facing the whole country and integrating into the world to build an "one center, one network" international circulation system. Through the development of 5-10 years, it is expected to form a modern steel industry with annual operating income exceeding 2.5 billion yuan.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!