The foundations for API 650 aluminum tanks

The API 650 oil tank stiffener ring and backing strip, if used, are primary components, and they shall comply with the requirements of R.2.1. The API 650 aluminum tanks stiffener ring may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange. One rat hole with a minimum radius of 3/4 in. shall be provided at each longitudinal shell joint and ring juncture weld.

Application scope of API 650 petroleum storage tank:
1. API 650 aluminum tanks Working pressure: atmospheric storage tank;
2. API 650 petroleum storage tank working temperature: -30℃～150℃;
3. API 650 petroleum storage tank liquid medium: various oil products, including naphtha, gasoline, diesel, kerosene, crude oil, fuel oil, heavy oil, benzene, xylene, methanol, ethanol;
4. API 650 petroleum storage tank volume: current design considerations generally do not exceed 10,000 cubic meters.

1200 tons API 5LGRB strips to Bangladesh. In December of 2015, we get one tender project from National Tubes Limited, which is a famous national enterprise in Bangladesh. It is an order of 1200 tons API 5L Gr. B steel strips, they bought these cargo to fabricate ERW pipe in local place.

The cost of mechanical cleaning for vertical storage tank, API 650 aluminum tanks is low, almost all oil can be recovered, and the quality of recovered oil is high. The cost of manual cleaning for vertical storage tank, API 650 aluminum tanks is high, the oil can not be recovered completely, and the quality of recovered oil is low. The mechanical cleaning of API 650 aluminum tanks adopts fully enclosed operation, and separates oil, water and oil sand. There is no direct discharge of oily sewage and waste gas, which will not pollute the environment.

Compared with other fast-moving consumer goods, steel consumption is obviously different, with a wide range of use and a long service life. Therefore, the quality and service of steel materials are particularly important. Service is always one of our top concerns, especially after-sales service. We have mature after-sales service team, and can help you solve problems professionally during application of the steel materials.