API standard 650 vertical welded storage tanks top attachment

Prevent the storage liquid from impacting the inner wall of the API 650 petroleum storage tank or increase the internal pressure, reduce the corrosion of the tank top and the tank wall, and extend the service life of the API standard 650 vertical welded storage tanks storage tank.

According to the structure type of floating roof, floating roof API standard 650 vertical welded storage tanks can be divided into internal floating roof tank and external floating roof storage tank. The internal floating roof tank is a floating roof tank with tank roof. The top is the combination of dome roof and floating roof, the external is dome roof, and the internal is floating roof. There is no vault on the top of the External floating roof tank, only a top plate floating with the storage liquid. The common feature of the inner floating roof tank and the outer floating roof tank is that both of them can reduce the evaporation loss of the storage liquid.

Low-pressure Storage Tanks for Liquefied Hydrocarbon Gases
API standard 650 vertical welded storage tanks Primary Components: In general, primary components include those components that may be stressed to a significant level, those whose failure would permit leakage of the liquid being stored, those exposed to a refrigerated temperature between –60°F and –270°F, and those that are subject to thermal shock. The primary components shall include, but will not be limited to, the following parts of a single-wall tank or of the inner tank in a double-wall tank: shell plates; bottom plates; roof plates; knuckle plates; compression rings; shell stiffeners; and manways and nozzles including reinforcement, shell anchors, pipe, tubing, forgings, and bolting.

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us API standard 650 vertical welded storage tanks specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

Our company is located in the Central Plains, Zhengzhou City, convenient transportation. There is the largest Xinzheng airport, welcome customers from all over the world to visit our company. Our factories are all located near the port. The logistics is very convenient, which can save the delivery time.