API 650 uplifting tanks dead load

The reticulated API 650 uplifting tanks shell API 650 storage tank is an important large-span space structure with high safety. Generally, the large-scale API 650 storage tank with a diameter of 21-60 meters or a volume of more than 20000 cubic meters should adopt the reticulated shell technology, which has been widely promoted and adopted in the world and China's petrochemical industry for more than 30 years.

Requirements for prefabrication of bottom plate of large vertical API 650 uplifting tanks:
1. The diameter of tank bottom should be enlarged by 0.1% ~ 0.15% according to the design diameter.
2. The minimum dimension of edge plate along the radius direction of tank bottom shall not be less than 700mm.
3. The distance between any adjacent welds of the base plate shall not be less than 300 mm.

Stamping of API 620 Storage Tank PlatesBefore plates required to be stamped by the steel mill are used, the inspector shall see that they bear the stamp. In laying out and cutting the API 650 uplifting tanks plates, at least one set of the original material identification markings should, if possible, be left where it will be plainly visible when the tank is completed. Should the identifying marks be obliterateSpot radiographic or ultrasonic examination shall be not less than 6 in. extending along the weld. Spot radiography shall comply with the standards given in 7.15.1.3. Where spot radiographic or ultrasonic examination is applied at joint intersections, the surface shall be prepared and examined for a distance of 3 in. on each side of the intersection, making the minimum length of examination 6 in. on the horizontal weld and 3 in. on the vertical weld.

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us API 650 uplifting tanks specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

The predecessor of Ningbo port is Ningbo Port Authority. Ningbo port consists of Beilun port, Zhenhai port, Ningbo port, Daxie port and Chuanshan port. It is a multi-functional and comprehensive modern deep-water port integrating inland river port, estuary port and seaport.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!