API 650 SUG III tanks data sheet

Impact Tests for High Alloys
Impact tests are not required for the high-alloy (austenitic stainless steel) API 650 SUG III tanks base materials, nickel alloy based materials, aluminum base materials, and weld deposited for the nonferrous (aluminum) materials. Impact tests are not required for austenitic stainless steel welds deposited by all the welding processes for services of –200°F and above. Austenitic stainless steel welds deposited for service below –200°F by all welding processes shall be impact tested in accordance with Q.6.2 except that the required impact values shall be 75% of the values as given in Q.2.2.2, Item c.API 650 can store oil, gas, chemical, water and biofuel for some of the most common tanks in the oil industry. API 650 can store contents at a lower pressure (maximum of 2 PSI) but at much higher temperature (-40 degrees F to 500 degrees F) than the standards of API 650 SUG III tanks. It can be any tank size.In year 2015, we ship 750 tons H beam to Pakistan for our old customer for building use. Because of urgent demand, the H beams are partial shipment by bulk vessel. Due to strong support of our customer, we also export many C channel steel, API 650 SUG III tanks I beam and other profile steel to local market.Large-scale vertical API 650 SUG III tanks mostly use internal tank bottom heating coils to heat the medium stored in the storage tanks. The heating coils are mostly smooth tube structures arranged in an annular circle along the bottom of the API 650 SUG III tanks. Commonly used heating methods include hot oil circulation heating method and hot water steam circulation heating method. The hot oil circulation heating method is to continuously extract part of the liquid medium from the storage tank, and then return it to the container to mix with the medium in the tank after heating, and the heat is quickly transferred through mechanical stirring.Our company has established and constantly improved the customer service system and emergency response system. Through the customer service management system, we track the service of the after-sales service team and provide efficient and standard services in time. At the same time, the company formulates a regular return visit system, compares the historical cases of customer problems, proposes a pre solution, and ensures that the service is in place in a short time.