API 650 storage tank tank-bottom reinforcing plate
API 650 storage tanks API 650 storage tank are only suitable for containers that can evenly support the entire bottom and containers for non-refrigerated equipment with a design maximum temperature of 200 degrees Fahrenheit. It API 650 storage tank requires a minimum thickness of 3/16 inch. Other characteristics of the API 650 storage tank are: it is composed of carbon steel, austenitic duplex stainless steel and aluminum.
The opening pressure or vacuum of the pressure relief and API 650 storage tank vacuum relief valves shall be checked by pumping air above the water level and releasing the pressure and then partially withdrawing water from the tank. After the tank has been emptied of water and is at atmospheric pressure, the anchorage, if provided, shall be rechecked for tightness against the hold-down brackets. Air pressure, equal to the design pressure, shall be applied to the empty tank, and the anchorage, if provided, and the foundation shall be checked for uplift.
API 650 storage tank weld tightness test: remove dirt from the API 650 storage tank weld, apply white powder emulsion, spray kerosene on the other side of the weld after drying. Because of the strong penetration of kerosene, if kerosene is sprayed after 12 hours (under low temperature conditions, the time can be extended), if the surface of the welded seam coated with white emulsion has no spots, the welded seam meets the requirements.
Firmly establish the "people-oriented, safe development" concept, strictly follow the safety production policy of "safety first, prevention first, comprehensive management", strengthen and improve the management and supervision of safety production in an all-round way, and strive to improve the controllability of safety management And effectiveness, cultivate safety culture, improve long-term safety production mechanism, and build a harmonious BEBON.
"Efficiency is benefit, time is money", the company is equipped with a high standard logistics team. After the products pass the factory inspection, they will coordinate the shipment as soon as possible according to customer requirements and schedules to hand over the booked steel materials to customers at the first time, to ensure no delay of customer's project progress, to strive for more project preparation time for customers.
The results of adopting two-level API 650 storage tank service system and implementing standardized management are mainly reflected in the formation of vigorous work style such as quick response and quick action. Our company's customer service center stipulates that employees must be accurate and quick in technical support and API 650 storage tank after-sales service. Through the formation of this fast, agile, vigorous style, to provide users with satisfactory service.
