API 650 partially anchored liquid-storage tanks supported cone roofs

,API 650 partially anchored liquid-storage tanks. weld tightness test: remove dirt from the API 650 partially anchored liquid-storage tanks weld, apply white powder emulsion, spray kerosene on the other side of the weld after drying. Because of the strong penetration of kerosene, if kerosene is sprayed after 12 hours (under low temperature conditions, the time can be extended), if the surface of the welded seam coated with white emulsion has no spots, the welded seam meets the requirements.The pressed-steel, round manhole with a 20-in. inside diameter shown in Figure F-8 is located in API 620 crude oil tank solid plate in spherical portion of a torispherical roof on a cylindrical storage tank 72 ft in diameter. The internal pressure, Pg, on the underside of the roof is 15 lbf/in.2 gauge. The thickness, t, of the roof plate required by 5.10.3 for the spherical portion of the roof is 1/2 in., which is exactly the thickness provided. No corrosion allowance is required. The materials in the oil tank roof plates and manhole frame conform to ASTM A283 Grade C steel; the main joints in the roof are double-welded butt joints, spot radiographed in accordance with 7.16 and 7.17.Welded steel API 650 partially anchored liquid-storage tanks storage tanks that are designed, manufactured and installed on the ground are classified according to the API standard system. The three API standards API 650 partially anchored liquid-storage tanks all adopt on-site production and installation of storage tanks.Safety production is the cornerstone of enterprise survival and development. The company established a safety management network, which achieved clear powers and responsibilities, clear responsibilities, effective management and control, and provided organizational guarantee for safe production. The company strictly complies with the "Environmental Protection Law", establishes an effective environmental protection emission control system and waste gas, waste water, waste solid recycling system, and makes great efforts to harden, lighten, green, and beautify the plant, and strive to build green steel enterprises.We are professional API 650 partially anchored liquid-storage tanks carbon steel plates supplier with good reputation, and have participated many significant projects that finished with carbon steel materials in the world. If you have any question about carbon steel materials, such as A36 steel modulus of elasticity, A283 grade C properties, A572 grade 50 hardness, API 650 partially anchored liquid-storage tanks EN 10025 S235JR equivalent Indian standard, S355JR specification, carbon steel price etc., please feel free to consult us.