API 650 flat-bottom oil storage tanks recommendation

Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API 650 flat-bottom oil storage tanks stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.

API 650 storage tank, double-layer oil tank environmental protection advantages: ordinary single-layer steel API 650 flat-bottom oil storage tanks oil tank is corroded by underground water and gas and electrolytic corrosion because it is buried underground all year round. The API 650 tank has a double-layer structure with a gap of 0.1 mm. The API 650 flat-bottom oil storage tanks outer layer of FRP ensures that the leakage will not directly leak into the soil and water source.

A Uganda client purchased 2100 tons SG255 gas cylinder steel coils in 2018. It is the first company in Uganda to provide re-furbishing, re-certification and manufacturing of new lpg cylinders. They have regular demands for sg255 coils API 650 flat-bottom oil storage tanks every 3 months. Limited by inland location, we can only ship container to mombasa, and then transfer to kampala. OurJISG3116 SG255 steel product is grade for gas cylinder steel with the tensile strength of 400MPa and the yield strength of 255MPa.

Static storage loss is also known as "small breathing" consumption. The rise and fall of the temperature in the API 650 flat-bottom oil storage tanks leads to the increase and decrease of the pressure in the tank, which makes the mixed oil gas discharged from the tank, and the external air is sucked into the tank, resulting in the oil consumption. Fluid level loss is also called "big breathing" loss. It is the oil consumption caused by the change of gas space volume in the API 650 flat-bottom oil storage tanks during the oil receiving and sending operation, which causes the mixed oil gas to be discharged out of the tank, and the external air is sucked into the tank, resulting in the oil consumption due to the change of liquid level height.

Responsibilities: dealing with quality feedback and complaints from Customer.Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office.