5454 aluminum tube API 650 open top welded storage tanks
Material for the outer tank API 650 open top welded storage tanks and for the roof that contains the vaporized liquefied gas but is primarily subjected to atmospheric temperatures may conform to one of the following:a)Table 4-1 for design metal temperatures down to –35°F (lowest 1-day mean ambient temperature of–35°F) without impact test unless they are required by Table 4-1 or by the Purchaser.b)Table R-3 for design metal temperatures down to –60°F without impact tests unless they are required by Table R-4 or by the Purchaser.
Corrosion allowance, if specified, shall be added to calculated API 650 tanks shell and self-supporting roof thicknesses; to minimum nominal thicknesses of bottom and supported API 650 open top welded storage tanks roof plates; to nozzles and manholes; and to all exposed surfaces of internal structural members and non-removable internals.
We have built solid cooperation with Myanmar Navy since 2015, starting from a try order about 412 tons LR AH36 shipbuilding steel plates. Myanmar navy builds frigate every year and book shipbuilding steel materials from us regularly. This time, the Myanmar navy’s local representative visit us and put another order about 2025 tons LR grade A steel plates. According to clients requirements, we arranged API 650 open top welded storage tanks SGS inspection for the LR grade A steel plates before shipping and send them inspection report.
}Storage tank is used to store all kinds of liquid, solid and gas materials. The common types of storage tank are oil tank, water storage tank, chemical tank, cement tank, API 650 open top welded storage tanks, etc. When choosing the storage tank, users should choose according to their actual needs, such as the material, pressure, form, capacity, temperature, density, etc. In addition, the environmental factors such as the temperature of the tank construction area, the ground endurance of the foundation, and the wind force should be considered.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
