2024 aluminum shapes API 650 self anchored flatbottom tanks

API 650 petroleum storage tank stipulates that if the thickness of the lower siding obtained by calculating the anti-overturning moment is greater than the thickness of the API 650 self anchored flatbottom tanks hydrostatic pressure test (both do not include the corrosion margin), the calculated thickness of the above siding required by the hydrostatic pressure is It should also be increased by the same proportion, unless special analysis is performed to determine the seismic overturning moment and corresponding stress at the bottom of each layer of API 650 petroleum storage tank wall.

After using for a certain period of time, it is necessary to check the corrosion protection of the metal oil tank and paint the outer wall of the API 650 self anchored flatbottom tanks with anti-corrosion paint. The inlet and outlet valves of API 650 self anchored flatbottom tanks shall be inspected and maintained regularly to ensure they are in good condition. Oil tank will produce a lot of dirt when it is stored for a long time. Usually, the cleaning cycle of metal oil tank is about three to five years.

Allowable compressive stresses shall be in accordance with 5.5.4 except that for aluminum alloy plate the allowable compressive stresses shall be reduced by the ratio of the modulus of compressive elasticity to 29,000 for values of (t – c)/R less than 0.0175 and by the ratio of the minimum yield strength for the aluminum alloy in question to 30,000 for values of (t – c)/R equal to or greater than 0.0175 (see 5.5.2 for definitions). In all other equations in this standard API 650 self anchored flatbottom tanks where yield strength or modulus of elasticity is used, such as Equations 27 and 28, similar corrections shall be made for aluminum alloys.

The shipping department of the company arranges shipping booking for customers' goods in advance, and makes good matching with inland transportation. Effectively manage and follow up the customer's shipping schedule and give feedback to customers in time. At the same time, the shipping department has a keen insight into the shipping market in different periods to reduce the transportation cost for the company and customers.

The predecessor of Ningbo port is Ningbo Port Authority. Ningbo port consists of Beilun port, Zhenhai port, Ningbo port, Daxie port and Chuanshan port. It is a multi-functional and comprehensive modern deep-water port integrating inland river port, estuary port and seaport.