1060 aluminum shapes API standard 650 storage tanks

Welded steel API standard 650 storage tanks storage tanks that are designed, manufactured and installed on the ground are classified according to the API standard system. The three API standards API standard 650 storage tanks all adopt on-site production and installation of storage tanks.

Crack treatment of API standard 650 storage tanks weld area: find out the crack tip with ray or ultrasonic flaw detection, drill cut-off holes at both ends of the crack with the cut-off method, the hole depth is slightly greater than the crack depth, or groove (crack stop groove) is made by angle grinder at both ends of the crack, shovel and grind the whole crack, and grind it into a suitable groove; use radiographic inspection and dye detection to verify that the crack has been completely excavated, and finally repair welding.

In this project, an elemental area of tank wall used is constructed of ASTM A442 Grade 55 steel plate subjected to a meridional unit force, T1, of 4000 lbf/in.2 tension and a latitudinal unit force, T2, of 5060 lbf/in.2 compression. The meridional radius of curvature, R1, is 75 in., and the length of the normal from the surface to the axis of revolution, R2, is 300 in. The joints in the wall are of double-welded butt-joint construction with a tensile efficiency of 85%. A corrosion allowance of 1/16 in. is required.
The problem in this example is to graphically find the minimum thickness of tank wall required for the given conditions (see 5.10.3.3).
Solution: As determined from Table 5-1, the maximum allowable tensile stress value, Sts, for ASTM A442 Grade 55 steel plate in simple tension is 16,500 lbf/in.2. Since the compressive stress is latitudinal, the governing value of R in this situation is R1, or 75 in.

The company's sales department has a professional team, they have professional steel knowledge, respond quickly, with the problems raised by customers can quickly give solutions, put the interests of customers first. With their own professional knowledge to provide customers with high-quality steel plate in line with the requirements. At the same time, in terms of price, we also have great advantages. Members of the business department make sure that the delivery time is short and the service is the best.

Due to the surge in business volume in recent years. In addition to coordinating our own truck fleet, our logistics department has continuously developed high-quality logistics companies and signed long-term cooperation agreements. While enjoying the professional and fast service of logistics companies, we have significantly reduced transportation costs. That not only ensure our customers receive the goods at the same time, but also help them reduce shipping costs.