1060 aluminum shapes API standard 650 low-alloy steel tanks
The factors affecting the "small breathing" loss of API standard 650 low-alloy steel tanks are: 1. It is related to the change of temperature difference between day and night. The greater the change of temperature difference between day and night, the greater the loss of "small breathing"; on the contrary, the smaller the change of temperature difference between day and night, the smaller the loss. 2. It is related to the sunshine time of the oil storage tank. The longer the sunshine, the more the "small breathing" loss; otherwise, the less the loss.
Stamping of API 620 Storage Tank PlatesBefore plates required to be stamped by the steel mill are used, the inspector shall see that they bear the stamp. In laying out and cutting the API standard 650 low-alloy steel tanks plates, at least one set of the original material identification markings should, if possible, be left where it will be plainly visible when the tank is completed. Should the identifying marks be obliterateSpot radiographic or ultrasonic examination shall be not less than 6 in. extending along the weld. Spot radiography shall comply with the standards given in 7.15.1.3. Where spot radiographic or ultrasonic examination is applied at joint intersections, the surface shall be prepared and examined for a distance of 3 in. on each side of the intersection, making the minimum length of examination 6 in. on the horizontal weld and 3 in. on the vertical weld.
API 650 petroleum storage tank pipeline stress and product pressure, tank pressure, uniform or non-uniform temperature difference between the tank wall and the tank bottom, which cause the radial displacement and longitudinal rotation of the API standard 650 low-alloy steel tanks tank wall at the opening to affect the oil tank wall The impact is obvious. Therefore, the design must ensure that the load applied by the external pipeline on the opening of the tank wall is within the safety limit. If the stress of the API standard 650 low-alloy steel tanks connecting piping is not handled properly, the wall of the API 650 petroleum storage tank may deform or even rupture, causing a major accident.