1060 aluminum bar API 650 welded steel storage tanks

The cleanliness of the API 650 welded steel storage tanks has a great influence on the safety of the tank and the quality of the oil stored. Keeping the API 650 welded steel storage tanks clean can slow down the corrosion of the tank wall and reduce the pollution to the oil. If the inside of the API 650 welded steel storage tanks is not cleaned all the year round, a lot of rust and metal impurities will be produced in the tank. These impurities will cause the oil to slowly oxidize and deteriorate. The impurities mixed into the oil will also block the filter and oil circuit, causing oil supply failure.

Materials for API 650 welded steel storage tanks primary components shall comply with the requirements of Tables R-1 and R-2. All primary components shall be impact tested in accordance with R.2.1.2 through R.2.1.4. Impact testing of API 620 welded storage tanks plates, including structural members made of plate, shall comply with Table R-1. Impact test specimens shall be taken transverse to the direction of final plate rolling.

There is a gap of 100 mm to 500 mm between the shell of API 650 crude oil storage API 650 welded steel storage tanks tank and the floating plate of external floating roof to ensure that there is no chuck during operation. Use API 650 welded steel storage tanks edge sealing system to reduce edge evaporation. The support legs of API 650 crude oil tank floating roof are usually movable and retractable and suspended in liquid.