Single-deck pontoon floating roof API standard 650 storage tank

The technology center has always been focusing on application research, improving market realization and scientific and technological contribution rate; taking user demand as the goal, highlighting the personalized development of products; taking the joint development of industry, University and research, and technology integration as the means, improving the starting point and level of innovation, and realizing the breakthrough of core technology; taking advanced research as the guide, pursuing the leap of technological development; taking system and mechanism innovation as the driving force, Promote and realize the working concept of technological innovation.Temperature Range: The provisions in this appendix are considered suitable for API standard 650 storage tank design metal temperatures from + 40°F to –60°F, inclusive. In general, refrigerated tank primary components include those components whose failure would result in leakage of the liquid being stored, those exposed to the refrigerated temperature, and those subject to thermal shock. Further definitions of such components are provided in API Standard 620 tank R.1.4.2 and R.1.4.3.API 650 petroleum storage tank specifications and standards are documents verified by the customer (owner) under different operating conditions; however, API standard 650 storage tank it must be verified whether these API 650 petroleum storage tank documents are suitable for use and whether they comply with applicable design specifications and/or specifications.Enterprise Motto:Integrity, harmony, dedication, innovation and developmentAbility is the cornerstone of success; action is the ladder of successGrow with the enterprise; progress with the enterpriseGive a platform to those who actually do things and a stage to those who successfully do thingsDare to be the first, to pursue excellence.Prefabrication requirements for API standard 650 storage tank, large vertical storage tanks:
1. The machined surface of the edge of the steel plate should be smooth, and there should be no defects such as slag inclusion, delamination, cracks, etc., and the surface hardened layer produced by the flame cutting groove should be removed.
2. Dimension deviation after steel plate processing: the deviation of plate width is less than 1.5 mm, the deviation of plate length is less than 2 mm, and the difference between diagonals is less than 3 mm.