Nominal diameter of API standard 650 carbon steel tank

API 650 petroleum storage tank stipulates that if the thickness of the lower siding obtained by calculating the anti-overturning moment is greater than the thickness of the API standard 650 carbon steel tank hydrostatic pressure test (both do not include the corrosion margin), the calculated thickness of the above siding required by the hydrostatic pressure is It should also be increased by the same proportion, unless special analysis is performed to determine the seismic overturning moment and corresponding stress at the bottom of each layer of API 650 petroleum storage tank wall.

The safety inspection of atmospheric storage tank, API standard 650 carbon steel tank is divided into external inspection, internal and external inspection and comprehensive inspection. External inspection shall be conducted at least once a year, internal and external inspection shall be conducted at least once every three years, and comprehensive inspection shall be conducted at least once every six years. The safety inspection of large atmospheric storage tanks, API standard 650 carbon steel tank requires special attention: the parts where the liquid level often fluctuates, the parts that are susceptible to corrosion, and the parts that are deformed and worn during use should be checked.

Any joints between the adjacent sections of API 620 oil storage tank stiffening rings, as shown in Figure Q-1, shall be made so that the required moment of inertia of the combined ring-shell section is provided. Weld joints between adjacent sections shall be made with full-thickness and full-penetration butt-welds. Stiffening-ring butt-welds may employ metal backing strips. Backing strips and the associated welding shall be made in a manner that provides a smooth contour in the rat hole and all other weld joint ends. All weld passes shall be started at the rat hole and other weld joint ends and shall be completed by moving away from these ends. Passes shall be overlapped away from edges to provide a smooth continuous weld.

Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;

The main competitive means adopted by major domestic ports are to expand ports, build deep-water berths and channels, improve service quality to reduce the comprehensive cost of customers, and at the same time, to improve competitive advantage, we should also take appropriate measures to reduce relevant costs and prices.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!