Maximum design temperature of API Std 650 stainless and carbon steel tank

As an experienced world class steel materials supplier and exporter, logistics and fast delivery is a crucial step to us. Our logistics department and shipping department take the responsiblity to allocate and transport steel materials from our mill and warehouse to customer port or designated destination. The cooperation of the two departemts are excellent and that powerfully support our fast delivery, and strive for shorter time for customers to receive steel materials.Density of API Std 650 stainless and carbon steel tank Liquid Stored
The density of the liquid stored shall be its maximum density within the range of design temperatures, but no less than 29.3 lbf/ft3 for methane, 34.21 lbf/ft3 for ethane, and 35.5 lbf/ft3 for ethylene.
Design Metal Temperature
The design metal temperature of each component exposed to the liquid or vapor being stored shall be the lower of the temperatures specified as follows: The design metal temperature of the components of the API 620 single-wall tank or the inner tank of a double-wall tank shall be the minimum temperature to which the tank contents shall be refrigerated, including the effect of subcolony at reduced pressure."If additional requirements are met, higher internal pressures are allowed. API 650 only covers tanks that support the whole bottom evenly and API Std 650 stainless and carbon steel tank tanks in non-refrigerated service that have a maximum design temperature of 200 degrees F. It requires that you have a minimum material thickness of 3/16 inch.Our vasion is to create a first-class steel plate manufacturing enterprise with international competitiveness. Business Vision: Improve value with quality and become the leader in the industry. Core values: people-oriented, integrity, responsibility, excellence. Development strategy: Seek development through science and technology, and seek benefits from management. Besides, we will create a harmonious business atmosphere, unblock the channels for employees to communicate, and build a stage for various sports and talents.X-ray inspection is mainly applicable to the internal inspection of pressure bearing parts and materials of metal oil tanks such as API Std 650 stainless and carbon steel tank. It can clearly find the blocky defects inside the welded joints. However, the cost and resource consumption of radiographic testing are large. Magnetic particle testing can effectively detect the surface and near surface defects of API Std 650 stainless and carbon steel tank etc. metal oil tanks, but magnetic particle testing can not effectively identify the internal defects of oil tanks.