ISO 630 plates API standard 650 stainless and carbon steel tank

The company has a group of experienced steel plate continuous processing line construction, production management, operation and professional and technical personnel. The company is a modern enterprise integrating scientific research and development, production processing, sales and service. Our main products include hot rolled plates, seamless pipes, API standard 650 stainless and carbon steel tank and steel structures. At the same time, it also adheres to international standards and adheres to the international line.The API 650 oil tank stiffener ring and backing strip, if used, are primary components, and they shall comply with the requirements of R.2.1. The API standard 650 stainless and carbon steel tank stiffener ring may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange. One rat hole with a minimum radius of 3/4 in. shall be provided at each longitudinal shell joint and ring juncture weld.This standard applies only to API 650 tank API standard 650 stainless and carbon steel tank whose entire bottom is uniformly supported and to API 650 tank in non-refrigerated service that have a maximum design temperature of 93°C (200 °F) or less.Company tenet: first class quality and service to create corporate brand.Business philosophy: people-oriented, innovation, continuous improvement, the pursuit of excellence. Quality policy: carry forward the quality spirit, build a perfect quality management system, and put the quality strategy into every detail of the company's daily work.Environmental policy: waste reduction and pollution prevention, continuous improvement, and environmental protection.The structure of the API standard 650 stainless and carbon steel tank foundation mainly includes the insulating anticorrosion layer on the top surface of the foundation, the tank wall support, the edge retaining structure, the sand cushion, the oil and water barrier, the detection signal tube and other structures. The construction materials and requirements of each basic structure of the storage tank are different. After the structure of the API standard 650 stainless and carbon steel tank foundation is built in accordance with the construction requirements, the settlement of the storage tank foundation needs to be observed, and the uneven settlement value of the storage tank foundation should be within the allowable safety range.