ISO 630 grade E355 plates API standard 650 self-anchored storage tanks

Standard Hydrostatic and Pneumatic TestsAfter erection is completed and stress relieving, radiographic examinations, or other similar operations, as may be required, are performed, each tank shall satisfactorily pass a series of hydrostatic and pneumatic tests as prescribed in 7.18.2 through 7.18.6. Whenever a solution film is specified in this section to be applied to welding, linseed oil or another equivalent material for disclosing air leakage may be substituted. In freezing weather, linseed oil or a similarly suitable material shall be used.The attachment welding around all openings and their reinforcements in the walls of the API 620 tank shall be examined by the magnetic-particle method both inside and outside the tank API standard 650 self-anchored storage tanks. When the underside of a tank bottom rests directly on the tank grade (and is not accessible after erection), such examination of welding on the underside of the bottom and subsequent air testing may be omitted.API 650 internal floating roof API standard 650 self-anchored storage tanks tank can be used to store gasoline, jet fuel and other volatile oil products, as well as aldehydes, alcohols (methanol, ethanol), ketones (acetone), benzene (benzene, toluene, xylene, styrene) and other liquid chemicals.We participated the National Railway tender of Bangladesh with our local agent together, and won the 1000 tons corten steel sheets order. The corten steel sheets are used to make train carriage. We finished production of the 1000 tons corten steel API standard 650 self-anchored storage tanks sheets within 40 days, and arranged SGS test for the customer before shipment. The customer gave very high comments to our product and service quality, as well as fast delivery.Prefabrication requirements of large vertical API standard 650 self-anchored storage tanks accessories: the prefabrication shall be deepened as far as possible in strict accordance with the requirements of construction drawings and specifications, according to the principle of convenient installation and construction, as much as possible to reduce the installation workload, especially the workload of high-altitude operation. The prefabricated accessories shall be strictly inspected to ensure the quality and make marks. In addition, effective measures should be taken to prevent deformation, damage and corrosion during storage, transportation and stacking on site.When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.