ISO 630 Gr E355C plates API 650 vertical welded storage tanks

BBN excels in the design, fabrication and erection of API-650 tanks. API (American Petroleum Institute) has created a set of standards for above ground API 650 vertical welded storage tanks oil storage, but these tanks are also commonly used for gasoline, chemical and water storage. API-650 storage tank solutions range in size from an 8’ -0” diameter shop fabricated tank up to and beyond 100’ -0” diameter field erected storage tank applications.

Requirements for prefabrication of the top of large vertical API 650 vertical welded storage tanks: The prefabrication of the tank top shall be prefabricated in blocks according to the drawings. Pay attention to the spacing of the welds after installation when setting out the material. Reinforcing ribs should be formed and inspected with an arc-shaped template. When a single top plate needs to be spliced, butt joints should be used. The forming of a single top plate should be welded between the reinforcing ribs and the top plate on the mould. After forming, check with an arc-shaped sample plate, and the gap should not be greater than 10 mm.

The {keyword shell that contains the liquid shall have butt-welded annular bottom plates with a radial width that provides at least 24 in. between the inside of the shell and any lap-welded joint in the remainder of the bottom and at least a 2-in. projection outside the shell. The stated values apply to full-sized specimens. For sub-size specimen acceptance criteria, see ASTM A20. An impact test temperature lower than the design metal temperature may be used by the API 620 large welded, low pressure storage tanks Manufacturer.

Our company's technical department is the core department of the whole company. There are a group of very professional technical personnel. They provide some architectural drawings according to the ideas of customers, and they are responsible for how to select the right materials. Including the evaluation of steel products such as multi steel plate, API 650 vertical welded storage tanks and steel pipe, grasp the whole production process, and strictly follow the production standards and customer quality requirements.

The company has our own truck fleet, and can transfer products flexibly and quickly. At the same time, we have large warehouses near the ports of Tianjin and Shanghai, so as to ensure that we can deliver high-quality products to customers in the first time. At the same time, it also greatly reduces the transportation cost, and realizes the double harvest of time benefit and economic benefit. Time guarantee is one of the important strengths of our service.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!