ISO 630 Gr E275C plates API Std 650 self-anchored flat-bottom steel tanks

Customer service center has provided after-sales service for many large-scale information systems, and has accumulated rich working experience in the process of API Std 650 self-anchored flat-bottom steel tanks service for many years. It can provide accurate, timely and high-quality support and service for users, which is well received by users.

The manufacturing requirements of bottom plate of vertical metal tank, API Std 650 self-anchored flat-bottom steel tanks are as follows: 1. In order to compensate welding shrinkage, the layout diameter of tank bottom is 5-2mm than the design diameter; 2. The butt joint of edge plate of tank bottom shall be machined automatically or semi-automatically; 3. The distance between any two adjacent welding joints on the tank bottom plate and the distance between the butt joint of edge plate and the longitudinal weld of bottom ring wall plate shall not be greater than 200 mm.

The {keyword shell that contains the liquid shall have butt-welded annular bottom plates with a radial width that provides at least 24 in. between the inside of the shell and any lap-welded joint in the remainder of the bottom and at least a 2-in. projection outside the shell. The stated values apply to full-sized specimens. For sub-size specimen acceptance criteria, see ASTM A20. An impact test temperature lower than the design metal temperature may be used by the API 620 large welded, low pressure storage tanks Manufacturer.