industrial storage oil tanks bearing ring
Some defects may be found after the regular safety inspection for the industrial storage oil tanks. The common industrial storage oil tanks defects are: Tank cracks, tank welding defects. The cracks on the base metal, surface and near surface of the tank wall shall be eliminated by grinding with circular arc, and then magnetic particle inspection or re inspection shall be carried out. Cracks in heat affected zone: generally, grinding method is used to eliminate cracks, and magnetic particle or dye flaw detection is used to confirm that there is no crack, and then repair welding or grinding smooth transition.
refrigerated tanks secondary components are those whose failure would not result in leakage of the liquid being stored. Secondary components also include those industrial storage oil tanks components that are not in contact with the refrigerated liquid but are subject to the refrigerated temperature vapors and have a combined tensile and primary bending stress under design conditions that does not exceed 6000 lbf/in.2. Secondary components that could be designed within this reduced stress are roof plates, including roof manways and nozzles with their reinforcement, roof-supporting structural members, and shell stiffeners.
API 650 storage tank is used for commonly used oil, gasoline, diesel, chemical and production water storage. industrial storage oil tanks Storage tanks built to these standards are spread across U.S. refineries, terminals, pipelines, and production facilities. The API 650 detailed standard specifies the design, processing, welding, inspection and installation procedures for storage tanks.
In December of 2015, our regular India customer sent us an inquiry for industrial storage oil tanks pipe. The inquiry requires no negative tolerance in both pipes’ outer diameter and pipe wall. After two weeks’ discussion, he put the order of 275 tons to us. The pipes are finished within just one month. Our customer come to our factory to inspect the quality and tolerance, all the products are well meet his demand. The pipes are arriving to Nhava Sheva port, customer is very happy with our products and service during the process.