industrial fuel tank facilities for inspector
Crack treatment of industrial fuel tank weld area: find out the crack tip with ray or ultrasonic flaw detection, drill cut-off holes at both ends of the crack with the cut-off method, the hole depth is slightly greater than the crack depth, or groove (crack stop groove) is made by angle grinder at both ends of the crack, shovel and grind the whole crack, and grind it into a suitable groove; use radiographic inspection and dye detection to verify that the crack has been completely excavated, and finally repair welding.
The impact tests for API 620 welded storage tanks used pipe (including structural members made of pipe), bolting, and forgings, shall be in accordance with ASTM specifications ASTM A333 (seamless only) pipe, ASTM A36 Mod 1 plate, ASTM A131 Grades CS, D, and E steel plate, ASTM A633 Grade A CSA G40.21 Grades 38WT, 44WT and 50WT high-strength low-alloy structural steel plate, ASTM A350 carbon and low alloy steel forgings, and ASTM A320 Grade L7 bolts.
API 650 internal floating roof industrial fuel tank tank can be used to store gasoline, jet fuel and other volatile oil products, as well as aldehydes, alcohols (methanol, ethanol), ketones (acetone), benzene (benzene, toluene, xylene, styrene) and other liquid chemicals.
In December of 2015, our regular India customer sent us an inquiry for industrial fuel tank pipe. The inquiry requires no negative tolerance in both pipes’ outer diameter and pipe wall. After two weeks’ discussion, he put the order of 275 tons to us. The pipes are finished within just one month. Our customer come to our factory to inspect the quality and tolerance, all the products are well meet his demand. The pipes are arriving to Nhava Sheva port, customer is very happy with our products and service during the process.