EN 10025 S355J2 plates API 650 liquid-storage tanks

Impact Tests for High Alloys
Impact tests are not required for the high-alloy (austenitic stainless steel) API 650 liquid-storage tanks base materials, nickel alloy based materials, aluminum base materials, and weld deposited for the nonferrous (aluminum) materials. Impact tests are not required for austenitic stainless steel welds deposited by all the welding processes for services of –200°F and above. Austenitic stainless steel welds deposited for service below –200°F by all welding processes shall be impact tested in accordance with Q.6.2 except that the required impact values shall be 75% of the values as given in Q.2.2.2, Item c.

The thickness of the overburden on the top of the API 650 oil tank should not be less than 0.5m. The surrounding backfill with clean sand or fine soil should be no less than 0.3m thick; the API 650 oil tank API 650 liquid-storage tanks operation platform ladder selection unit is considered in a unified manner. The buried operation well is designed for buried horizontal oil tanks, and the two are compatible.

In 2015 , We get the tender from Myanmar Government, the total quantity is 1200 ton ABS-AH36 steel plate, we supply the steel plate with painting ( which standard is according to ISO SA2.5) with gray Color 20 Micron. After Get Customer Contract, Steel Plate Are Produced within 25 days .Then, Goods transported to Tianjin Port And Shipping On Time To Statisfy With Project Expected After Finished Producing. The Steel Quality API 650 liquid-storage tanks we offered receive good Praise from our Customers .

Prefabricating API 650 liquid-storage tanks components before construction can improve construction efficiency, save time and cost, and is currently a common method for the construction of large vertical storage tanks. The main prefabricated components of a large vertical API 650 liquid-storage tanks include the tank body, the storage tank wall, the top of the storage tank, the bottom of the storage tank, and the accessories of the storage tank. The prefabrication of the components should follow a reasonable workflow, and carry out appropriate heat treatment and testing, so as to improve manufacturing accuracy.

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.