CSA G40.21 grade 350W plates API 650 welded storage tanks

API 650 petroleum storage tank basic knowledge, storage tank concept and use: API 650 welded storage tanks storage equipment for storing crude oil, gasoline, kerosene, petroleum and various non-volatile chemicals, API 650 petroleum storage tank is a storage and transportation system facility, oil refining, chemical industry An important part of the device.

Requirements for prefabrication of the top of large vertical API 650 welded storage tanks: The prefabrication of the tank top shall be prefabricated in blocks according to the drawings. Pay attention to the spacing of the welds after installation when setting out the material. Reinforcing ribs should be formed and inspected with an arc-shaped template. When a single top plate needs to be spliced, butt joints should be used. The forming of a single top plate should be welded between the reinforcing ribs and the top plate on the mould. After forming, check with an arc-shaped sample plate, and the gap should not be greater than 10 mm.

In this project, an elemental area of tank wall used is constructed of ASTM A442 Grade 55 steel plate subjected to a meridional unit force, T1, of 4000 lbf/in.2 tension and a latitudinal unit force, T2, of 5060 lbf/in.2 compression. The meridional radius of curvature, R1, is 75 in., and the length of the normal from the surface to the axis of revolution, R2, is 300 in. The joints in the wall are of double-welded butt-joint construction with a tensile efficiency of 85%. A corrosion allowance of 1/16 in. is required.
The problem in this example is to graphically find the minimum thickness of tank wall required for the given conditions (see 5.10.3.3).
Solution: As determined from Table 5-1, the maximum allowable tensile stress value, Sts, for ASTM A442 Grade 55 steel plate in simple tension is 16,500 lbf/in.2. Since the compressive stress is latitudinal, the governing value of R in this situation is R1, or 75 in.

In line with the service concept of "honesty first, customer first" and the service tenet of "all for customer satisfaction", the company adopts the acceptance and response mode of combining manual and automatic, and accepts the diversified service demands of customer business consultation, complaint declaration, business acceptance, etc. through telephone, fax, e-mail, visit, letter, etc.

The company has huge steel API 650 welded storage tanks products stock all the year round to meet the urgent needs of customers. For stock products, we can arrange delivery within 3 days. The transportation department and shipping department shall coordinate and follow up to update the progress to customers regularly, i.e. where the goods have arrived, so as to let customers not worry and rest assured. Think about what the customers think and what the customers are anxious about, solve problems for customers efficiently and effectively, is the direction of our unremitting efforts.