CSA G40.21 grade 260W plates API standard 650 anchored tanks
According to API standard 650, the stairs used for API 650 petroleum storage tanks or thermal insulation tanks should be double longitudinal beams supported by a minimum of ribs. If the gap between the API standard 650 anchored tanks tank shell and the stringer of the API 650 petroleum storage tank exceeds 200mm, handrails should be provided on both sides of the stairs. Unless otherwise specified, according to API standard 650 anchored tanks ASTM A123, the following accessories shall be hot-dip galvanized. The damaged zinc coating should be repaired with zinc alloy.
The safety inspection of atmospheric storage tank, API standard 650 anchored tanks is divided into external inspection, internal and external inspection and comprehensive inspection. External inspection shall be conducted at least once a year, internal and external inspection shall be conducted at least once every three years, and comprehensive inspection shall be conducted at least once every six years. The safety inspection of large atmospheric storage tanks, API standard 650 anchored tanks requires special attention: the parts where the liquid level often fluctuates, the parts that are susceptible to corrosion, and the parts that are deformed and worn during use should be checked.
Low-pressure Storage Tanks FireproofingAlthough general fire prevention and fire protection measures are expected to be fully covered by other safety codes, tanks API standard 650 anchored tanks constructed according to these rules, which may be subject to fire exposure resulting from any cause, shall have their supports suitably fireproofed.Special consideration shall be given to provisions for ample drainage facilities for accidental spills or leakage of flammable contents from such tanks or adjacent piping and other equipment if the contents may become ignited.Subject to special considerations in isolated locations, tanks in which flammable liquid products are stored at temperatures well above their average boiling point shall be suitably fireproofed or otherwise protected.
We can process the steel materials according to your drawing. Or if you can not make drawing, please send us API standard 650 anchored tanks specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.
BBN company has implemented a resource strategy combining global resource procurement, domestic resource unified purchase, and joint purchase and distribution. It has maintained good relations of cooperation with more than 100 domestic and foreign steel mills, and can purchase low-quality and high-quality steel futures in all directions and through multiple channels. The company can grasp the specifications and quantities of the spot resources of major steel mills in real time, and can timely and quickly meet customer demand for steel spot resources.