Construction of API standard 650 tanks
API 650 petroleum storage tank stipulates that if the thickness of the lower siding obtained by calculating the anti-overturning moment is greater than the thickness of the API standard 650 tanks hydrostatic pressure test (both do not include the corrosion margin), the calculated thickness of the above siding required by the hydrostatic pressure is It should also be increased by the same proportion, unless special analysis is performed to determine the seismic overturning moment and corresponding stress at the bottom of each layer of API 650 petroleum storage tank wall.
The thickness of the API standard 650 tanks annular bottom plates shall be in accordance with Table Q-4 (for steel or aluminum, as applicable). The thicknesses shown are minimums. The ring of annual plates shall have a circular outside circumference, but it may have a regular polygonal shape inside the tank shell with the number of sides equal to the number of annular plates. These pieces shall be butt-welded in accordance with Q.7.1.1, Item b. The plates of the first shell course shall be attached to the annular bottom plates by a weld as required by API 620 oil tank 5.9.5 except when a full-penetration weld is used or required (see Q.7.1.1). Butt-welds in annular plates shall be not closer than 12 in. from any vertical weld.
X-ray inspection is mainly applicable to the internal inspection of pressure bearing parts and materials of metal oil tanks such as API standard 650 tanks. It can clearly find the blocky defects inside the welded joints. However, the cost and resource consumption of radiographic testing are large. Magnetic particle testing can effectively detect the surface and near surface defects of API standard 650 tanks etc. metal oil tanks, but magnetic particle testing can not effectively identify the internal defects of oil tanks.
The 2019 Year of the Pig is the 70th anniversary of the founding of the People's Republic of China. Growing up with the motherland, our company sang songs to the mark the 70th victory anniversary. In September, we organized all employees to sing "My Country and I" and made a film.
Steel logistics takes “steel” as the carrier, “logistics” as the operation, and “information” as the core. It integrates steel trade, e-commerce, and tripartite logistics as one. The flow of funds, information, and logistics promote each other and integrate with each other. Construction industry, metallurgy industry, information industry, modern logistics cross-industry. Our logistics service team will make sure our goods delivered to the leaving port on time.Makes you worry-free after sales.
The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.