ASTM A992 structural shapes API standard 650 carbon steel storage tanks
According to API 650 tanks, anchoring devices should be designed to transfer overturning moments to the API standard 650 carbon steel storage tanks tank foundation. At the same time, according to API 650 tank Appendix F, when the tank is to be anchored, the size of the anchoring parts is determined by the maximum lifting force caused by the internal pressure and wind load or the combination of internal pressure and seismic load.
Comparison of the quality of mechanical cleaning and manual cleaning of vertical storage tanks, API standard 650 carbon steel storage tanks. The mechanical cleaning of the API standard 650 carbon steel storage tanks can make the inside of the tank be thoroughly cleaned in multiple directions, and the cleaning quality is high, and the cleaned oil does not contain lumpy impurities. While the walls and roof of the API standard 650 carbon steel storage tanks cannot be cleaned in multiple directions during manual cleaning, and the cleaning quality is not easy to be guaranteed. The oily sewage collected after cleaning usually contains a lot of lumpy impurities, and these oil products are difficult to clean.
Data Required from Manufacturer on Completed TanksIf specified in the purchase order, the Manufacturer shall supply marked copies of plans (or a separate sketch) showing the location of all plates, with a means of identifying each plate with the heat numbers. These markings shall be checked by the inspector. A copy shall be attached to the Manufacturer’s report.Check of Stress-relieving OperationThe API standard 650 carbon steel storage tanks inspector shall check any thermal stress-relieving operation and shall be satisfied that the temperature readings are accurate and that the procedure conforms to the applicable requirements of these rules.
In the final analysis, the market competition is the competition for customers. Whether selling products or services, the final customer satisfaction is the standard to test the success or failure of marketing work. The so-called after-sales service is to fully understand customers, study customer psychology, pay attention to after-sales details, improve work shortcomings, improve service quality, and Exchange customer brand loyalty through the whole process of quality service.
Box making, door-to-door: fill in the packing plan: box making time, ship name, voyage number, customs declaration number, transfer port, destination port, gross weight, number of pieces, volume, door point, contact person, telephone number, etc., and arrange the train shift 1-2 days before the closing date (two days before the ship's date). Internal loading: fill in the packing plan: ship name, voyage number, customs declaration number, transfer port, destination port, gross weight, number of pieces, volume, cabin number, etc., and arrange the train shift 1-2 days before the closing date (two days before the ship's date).
