ASTM A662 plates API standard 650 aboveground welded storage tanks
Inspection of Welded storage tanks Surfaces Exposed during FabricationThe edges of API standard 650 aboveground welded storage tanks plates, openings and fittings exposed during fabrication shall be inspected carefully to make sure that any defects have been uncovered, as well as to determine that the work has been performed properly.Minor defects found may be repaired only after the inspector approves the method and extent of repairs. Materials that have more than minor defects that cannot be satisfactorily repaired shall be rejected.Spot radiographic or ultrasonic examination shall be not less than 6 in. extending along the weld. Spot radiography shall comply with the standards given in 7.15.1.3. Where spot radiographic or ultrasonic examination is applied at joint intersections, the surface shall be prepared and examined for a distance of 3 in. on each side of the intersection, making the minimum length of examination 6 in. on the horizontal weld and 3 in. on the vertical weld.
The API standard 650 aboveground welded storage tanks most widely used and most commonly used standard for global storage tank construction and procurement is API 650. The Chinese translation name is "AP1650 Steel Welded Petroleum Storage Tank". API 650 storage tank is for commonly used oil, gasoline, diesel, chemical and production water storage, etc.
In 2014, we offered 175 ton Cold rolled stainless steel plate to Thailand. The API standard 650 aboveground welded storage tanks products are from TISCO. Here is the MTC that we offered to customer. We have our own quality team. Our quality team will inspect every order before shipment for customer. Normally, we will test the chemical composition, thickness, width, and length. Here are some pictures for last inspection.
}Oil storage tank with floating roof structure: The floating roof in the API standard 650 aboveground welded storage tanks oil storage tank can effectively reduce the volatilization consumption of oil, because the gas space on the oil liquid surface in the floating roof storage tank is small, the exhaust volume is low, and the breathing loss is very small. That can reduce the volatilization loss caused by the "big breath" of the API standard 650 aboveground welded storage tanks. Strengthen the inspection and maintenance of API standard 650 aboveground welded storage tanks: regularly check the sealing conditions of oil storage tanks, and check and maintain important auxiliary equipment to ensure good sealing performance.
If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.
