ASTM A36 plates API 650 mixed material tanks

Low-pressure storage tanks for Liquefied Hydrocarbon Gases
API 650 mixed material tanks Primary Components: In general, primary components include those components that may be stressed to a significant level, those whose failure would permit leakage of the liquid being stored, those exposed to a refrigerated temperature between –60°F and –270°F, and those that are subject to thermal shock. The primary components shall include, but will not be limited to, the following parts of a single-wall tank or of the inner tank in a double-wall tank: shell plates; bottom plates; roof plates; knuckle plates; compression rings; shell stiffeners; and manways and nozzles including reinforcement, shell anchors, pipe, tubing, forgings, and bolting.

Welding certification is regulated by Section 10 of the American Society of Mechanical Engineers (ASME). For both API 650 mixed material tanks storage tank API 650, non-destructive inspection is required, but third-party inspection is not required.

In year 2015, we ship 750 tons H beam to Pakistan for our old customer for building use. Because of urgent demand, the H beams are partial shipment by bulk vessel. Due to strong support of our customer, we also export many C channel steel, API 650 mixed material tanks I beam and other profile steel to local market.

Generally, external environment corrosion should be considered before design and construction of API 650 mixed material tanks and so on storage tanks. The corrosion on the outer surface of storage tank is often worse than that on the inner surface. Especially in the chemical industry area, there are often acid fog, alkali or salt dust in the atmosphere. These impurities form an active corrosive medium with dew or steam and oxygen in the atmosphere. The corrosion of the external environment of the storage tank shortens the maintenance period of the storage tank, even causes the storage tank to be scrapped in advance, which affects the normal operation of the storage and transportation.

From the order to the delivery, there are three quality inspections to ensure that the qualified rate of finished products is more than 100%. We promise that every order will be tracked in a timely manner to ensure that customers can receive goods safely and constantly listen to their opinions and suggestions, reflect on our own problems, and let customers feel at ease. We have a large warehouse in Shanghai and Tianjin, which can provide customers with sufficient sources of supply.