ASTM A350 forgings API standard 650 liquid-storage tanks

Normal pressure API 650 storage tank: When the gas side pressure of API 650 storage tank is the same as atmospheric pressure or less than 13 atmospheres (gauge), API standard 650 liquid-storage tanks is called atmospheric storage tank. API 650 petroleum storage tanks low pressure storage tank: when the pressure is greater than 13 atmospheres (gauge) and less than 0.1MPa, it is called low pressure storage tank.

Management information and high efficiency. Because of the rapid flow of API standard 650 liquid-storage tanks goods, container multimodal transport and "door-to-door" transport, it is required that the port must have a modern information network, so that it can have the comprehensive capabilities of all-weather access, rapid loading and unloading, customs clearance, collection, distribution, storage and transportation

The materials used in the construction of Appendix Q oil tanks may be subject to severe pitting, cracking, or rusting if they are exposed to contaminated test water for extended periods of time. The Purchaser shall specify a minimum quality of test water that conforms to Q.8.3.2 through Q.8.3.8. After the water test is completed, the tank API standard 650 liquid-storage tanks shall be promptly drained, cleaned, and dried.

API standard 650 liquid-storage tanks weld tightness test: remove dirt from the API standard 650 liquid-storage tanks weld, apply white powder emulsion, spray kerosene on the other side of the weld after drying. Because of the strong penetration of kerosene, if kerosene is sprayed after 12 hours (under low temperature conditions, the time can be extended), if the surface of the welded seam coated with white emulsion has no spots, the welded seam meets the requirements.