ASTM A27 grade 60-30 floating roofs API 650 open top welded storage tanks

The outer layer of API 650 tank is glass fiber reinforced plastic layer with a thickness of more than 2.5mm, which API 650 open top welded storage tanks has strong corrosion resistance and electric corrosion resistance. Special process technology is used between the two layers to make the gap reach 0.1 mm, so as to eliminate the existence of potential safety hazard from the root.

In order to ensure the safety of the vertical storage tank, API 650 open top welded storage tanks, the supplier should inspect the tank carefully before delivery. The failure of the tank body is mainly due to the weld and crack of the product. The inspection of API 650 open top welded storage tanks, vertical storage tank weld and microcrack is mainly to inspect the appearance forming quality of weld. The inspection contents include weld leg height, undercut, welding deformation, weld bead, arc pit, weld straightness, etc., as well as the internal quality of weld, such as slag inclusion, porosity, incomplete penetration, crack, incomplete fusion, etc.

The API 650 open top welded storage tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

The technology center has always been focusing on application research, improving market realization and scientific and technological contribution rate; taking user demand as the goal, highlighting the personalized development of products; taking the joint development of industry, University and research, and technology integration as the means, improving the starting point and level of innovation, and realizing the breakthrough of core technology; taking advanced research as the guide, pursuing the leap of technological development; taking system and mechanism innovation as the driving force, Promote and realize the working concept of technological innovation.

Our company doesn't need the cheapest quotation to choose international logistics company, but the price performance ratio will be high, the service will be good, and the transportation must be safe and punctual, which will not affect the time when the API 650 open top welded storage tanks goods arrive at the destination, and the logistics situation will be well communicated with customers in advance. Therefore, when we choose international logistics companies, we will have a look at their timeliness and service attitude in advance. It is only important to transport goods according to the requirements of customers for logistics.