ASTM A216 grade WCA external floating roofs API standard 650 mechanically-anchored steel tanks

Fabricated to API standard 650 Welded Tanks for Oil Storage Shop Assembled API standard 650 mechanically-anchored steel tanks storage tanks, these tanks are commonly used at oil and natural gas terminals, API standard 650 mechanically-anchored steel tanks processing plants, and midstream facilities located along pipelines at the pumping, compression, or metering stations. API 650 storage tanks are designed and fabricated considering operating pressures up to 2.5 PSIG, corrosion allowance, wind loading, and seismicity.

After more than 20 years of ups and downs in the steel industry, BBN company's customers have covered South America, North America, Europe, Africa, Southeast Asia and the Middle East and other countries and regions. We treat every customer who inquires with us sincerely, whether you cooperate with us or not, we will provide you with the best quality steel solutions. Our company team also support the online customer service.

The API standard 650 mechanically-anchored steel tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.