API Std 650 welded tanks for oil storage in various sizes and capacities

High temperature heat transfer oil fin tube heating device for large API Std 650 welded tanks for oil storage has the advantage of high heat transfer efficiency. The high-temperature heat-conducting oil finned tube heating device adopts high-efficiency outer finned tubes. The outer finned tube coils are immersed in a water bath. Compared with ordinary light tubes, the contact area between the evaporation coils and the medium is increased. The total heat transfer coefficient of the coil is determined by the heat transfer coefficient outside the tube. This increases the heat flux per unit tube length and improves the overall heat transfer efficiency.

refrigerated tanks secondary components are those whose failure would not result in leakage of the liquid being stored. Secondary components also include those API Std 650 welded tanks for oil storage components that are not in contact with the refrigerated liquid but are subject to the refrigerated temperature vapors and have a combined tensile and primary bending stress under design conditions that does not exceed 6000 lbf/in.2. Secondary components that could be designed within this reduced stress are roof plates, including roof manways and nozzles with their reinforcement, roof-supporting structural members, and shell stiffeners.

The after-sales service personnel understand the user's ideas and needs in detail, and stand on the other side's position and interests. Actively communicate with users and help them solve practical problems. This not only solves the service problem, but also improves the customer's trust in the company.

API 650 can store oil, gas, chemical, water and biofuel for some of the most common tanks in the oil industry. API 650 can store contents at a lower pressure (maximum of 2 PSI) but at much higher temperature (-40 degrees F to 500 degrees F) than the standards of API Std 650 welded tanks for oil storage. It can be any tank size.