API Std 650 unanchored flat-bottom tank reinforcement and welding

Structural features of API 650 double-layer oil tank: steel glass fiber reinforced plastic double-layer structure, special processing method is adopted between the API Std 650 unanchored flat-bottom tank internal steel shell and glass fiber reinforced plastic layer, so that a gap of 0.1 mm is created between the internal and external layers. Even if the API 650 oil storage tank leaks, it can ensure that the contained dangerous substances only flow in the gap, and will not immediately overflow the external environment.

We have efficient and quick logistic team service. We promise that after the customer places the order, the spot products will be shipped, processed, and cut on the same day. The steel API Std 650 unanchored flat-bottom tank products will be shipped in 2-5 days according to the characteristics of the product. The company has always been adhering to the service concept of "integrity, pragmatism, enthusiasm" and dedicated to providing our customers with high-quality steel products and after-sales service.

Storage Tank Annular Bottom Plates
Thickness shall be per API 650, Appendix E (with loads modified by requirements of this appendix) plus corrosion allowance unless a thickness increase is required for compliance with Appendix R or Appendix Q. Annular plate width shall be per API 650, Appendix E (with loads modified by requirements of this appendix) unless a width increase is required for compliance with Appendix R or Appendix Q. Thickness used for determination of API 650 welded storage tank standard, Appendix E width shall be based on the thickness required for seismic product hold down.

Requirements for prefabrication of the top of large vertical API Std 650 unanchored flat-bottom tank: The prefabrication of the tank top shall be prefabricated in blocks according to the drawings. Pay attention to the spacing of the welds after installation when setting out the material. Reinforcing ribs should be formed and inspected with an arc-shaped template. When a single top plate needs to be spliced, butt joints should be used. The forming of a single top plate should be welded between the reinforcing ribs and the top plate on the mould. After forming, check with an arc-shaped sample plate, and the gap should not be greater than 10 mm.