API Std 650 tanks slab foundations
Before pressure test, the main drain hose system of API 650 petroleum storage tank floating roof should be thoroughly flushed. Provide blind flanges, gaskets and bolts required for the API Std 650 tanks test (other types of covers are also required if necessary). Covers for maintenance shall be provided in accordance with the interfaces specified by API 650 petroleum storage tanks, and these seals shall remain in place after the test; and for those interfaces that are not provided for maintenance covers, the covers can be removed after the API Std 650 tanks test.
The process parameters should be strictly controlled in sand blasting of API Std 650 tanks. The working pressure of abrasive chamber is between 0.5 and 0.6a, and the outlet pressure of air compressor shall not be lower than 0.6 WPa. According to the test results, the distance between nozzle and workpiece shall be controlled at 80 - 200 mm and spraying angle of 30 ~ 75°is appropriate.
On November 1st, our company organized some of company staff to visit Zhengzhou Children Welfare Institute, and gave children cookies and toys, as well as concerns to the Children. With the development of the society, disabled children gets increasing concerns and help from all walks of life. Fortunately, Chinese Government gives high concern to the handicapped children and has built Children Welfare Institutes all over the country to guarantee their lives.
The refrigerated tank primary components shall also include those parts of a single-wall or an inner tank that are not in contact with the refrigerated liquid but are subject to the refrigerated temperature. Such API Std 650 tanks components include roof plates, roof manways and nozzles with their reinforcements, roof-supporting structural members, and shell stiffeners when the combined tensile and primary bending stresses in these components under design conditions are greater than 6000 lbf/in.2.