API Std 650 stainless and carbon steel tank tank-bottom reinforcing plate

The interior of API 650 storage tanks to be internally lined or coated must have all edges rounded to a minimum of 3 mm radius. Internal welds must be completely seal welded, ground smooth, and free from API Std 650 stainless and carbon steel tank surface porosity, pockets, and high spots. Remove weld spatter. Vendor as specified on API 650 storage tanks drawing must perform additional surface preparation.

Product concept: take the technology leading as the pillar of the enterprise, achieve the development goal of the enterprise with the reliable products, the reliable technology and the trustworthy services, and devote to the creative reform activities leading in the technical development and career of the industry to create new value through continuous change.

BBN company has implemented a resource strategy combining global resource procurement, domestic resource unified purchase, and joint purchase and distribution. It has maintained good relations of cooperation with more than 100 domestic and foreign steel mills, and can purchase low-quality and high-quality steel futures in all directions and through multiple channels. The company can grasp the specifications and quantities of the spot resources of major steel mills in real time, and can timely and quickly meet customer demand for steel spot resources.

API Std 650 stainless and carbon steel tank any joints between the adjacent sections of stiffening rings, as shown in Figure R-1, shall be made so that the required moment of inertia of the combined ring-shell section is provided. Weld joints between adjacent sections shall be made with full-thickness and full-penetration butt-welds. Stiffening-ring butt-welds may employ metal backing strips. Backing strips and the associated welding shall be made in a manner that provides a smooth contour in the rat hole and all other weld joints ends. All weld passes shall be started at the rat hole.