API Std 650 petroleum storage tanks flush-stacked on the inside
One of the most widely used design codes is the API 650 Standard, from the American Petroleum Institute. The main objective of this standards API Std 650 petroleum storage tanks is, through the requirements contained in its various sections, to facilitate the purchase and construction of vertical, aboveground, welded fabricated tanks assuring that required safety regulations are met.
In addition to the requirements of API Standard 620 tank Appendix Q.8.1, the nameplate shall be attached to the tank at an accessible location if it is outside of any insulation or protective covering of the tank. The nameplate for the inner tank shall be located on the outer tank wall but shall refer to the inner tank. The nameplate, if any, for the outer tank of a double-wall tank shall be located adjacent to the nameplate or the inner tank and shall refer to the outer tank.
When the API Std 650 petroleum storage tanks is welded, the weldment should be fixed rigidly. After welding, when the weldment is cooled to normal temperature, the rigid fixation can be removed, which can effectively prevent angular deformation and wave deformation. Although some measures have been taken, the welding deformation of API Std 650 petroleum storage tanks is still unavoidable, so it is necessary to take corrective measures to compensate the deformation. Mechanical correction is to make the parts easy to deform in the welding process by mechanical or other rigid materials to produce simple deformation, so as to restore the state before welding.
The company attaches great importance to the value of iron and steel, constantly improving itself in terms of attitude, innovation, human resources, etc., integrating the value of iron and steel into the company's philosophy, showing the spirit of fighting for API Std 650 petroleum storage tanks iron and steel, forging iron and steel enterprise, creating steel market, establishing iron and steel team, and attaching importance to the sustainable development of iron and steel industry, so as to make iron and steel our permanent cause.
The predecessor of Ningbo port is Ningbo Port Authority. Ningbo port consists of Beilun port, Zhenhai port, Ningbo port, Daxie port and Chuanshan port. It is a multi-functional and comprehensive modern deep-water port integrating inland river port, estuary port and seaport.
Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel API Std 650 petroleum storage tanks plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.
